GV/ CS-4045/ 4045DR Auto Tenoner
  • FEATURE
  • SPECS
  • Fully automatic function, just place the material against the stops, machine will automatic clamp, and move in for shaping and drilling, come out and release the hold down.
  • One shaper head and one drill head for the dowel at each side of table.
  • The 6" high stackable spindle by pneumatic up & down with 3 different stops are easily and accurately setup for each cutter position.
  • Fast, safe and labor saving.
  • Table move from in and out by variable speed pneumatic power to achieve fully cutting power.
  • Two table moves in and out separated for tongue and groove, end match application or two tables can be connecting together for longer material.
  • Rigid construction on the heavy sheet metal frame, cast iron table & base for durability usage.
  • Heavy duty industrial motor is suitable for heavy duty cutting under full load.
  • Liner guide rails and bearings let the operator moving the table by lightweight and smoothly to get the long life usage also.
  • Cast iron fence locks in the table groove to finish 45 degree cut easily.
  • Twin heavy-duty air pistons hold down the work pieces tightly to the table during the cutting process.
Specifications GV/ CS-4045 GV/ CS-4045DR
Max. Cutting Length (Left or Right) 20" (508 mm)
Max. Cutting Length (two table) 40" (1016 mm)
Max. Cutting Length (45°) 30" (762 mm)
Max. Cutting Width 13¾" (349 mm) 12¾" (324 mm)
Spindle under Nut 4" (102 mm)
Max. Cutter Size 5" (127 mm)
Spindle Diameter 1¼" (32 mm)
Spindle Length 6" (152 mm)
Spindle Speed 9000 RPM
Shaper Motor 5 HP x 2
Drill Motor N/ A 1 HP x 2
Dust Hood 5" x 2 (127 mm x 2)
N. W. 2613 LBS (1185 kg) 2853 LBS (1294 kg)
G. W. 3233 LBS (1466 kg) 3464 LBS (1571 kg)
Top