GV/ RM-30AT Mutiple Round Pole Making Machine
- The GV/ RM-30AT is capable of producing multiple rods or two side moulding at high production rate.
- It is built with top and bottom cutter spindle for typically cutting wood board in to round rods.
- It can be use wider board without pre-cutting.
- When cutters are replaced with planner cutter heads this machine can be perform double sides planning or moulding.
- Variable speed feeding for fast and easy adjustment.
- Industrial full power motor for maximum cutting capacity.
- Precision sealed long life bearing.
- Heavy cast iron frames and table for durability usage.
- Suitable for cutting wood board into round rods.
- Designed for high production performance.
- Number of round rods per pass is determined by the diameter to be cut, maximum cutting width is 4" (100mm).
- Cutting capacity Ø2 ~ Ø30mm in diameter.
- Magnetic switch control.
- Easy adjustment in every way, more convenient than competitors on the market that saves your adjustment time.
|Range of Working Diameter||Ø0.08" ~ Ø1-1/6" (Ø2 ~ Ø30 mm)|
|Upper Spindle||7½ HP|
|Bottom Spindle||7½ HP|
|Feed Motor||1 HP|
|Max. Working Width||4" (100 mm)|
|Spindle Speed||6500 RPM|
|Feed Speed||15 ~ 45 FPM (4 ~ 13 m/ min)|
70" x 33" x 49"
(1780 x 850 x 1250 mm)
|N. W.||2095 LBS (950 kg)|